XTOOL IP919PRO Car Diagnostic Tools Bluetooth Wireless ECU Coding Topology Map Bi-Directional OBD Automotive Scan Tool 51+ Reset

Selling Points of XTOOL InPlus IP919PRO

All Functions lifetime Free Use, 3 Year Free Software Update

1. All System Diagnosis + Topology Mapping + Pre & Post Scan Lifetime Free Use

2. ECU Online Coding & Programming Lifetime Free Use to activate Hidden functions.

3. Lifetime Free Use Active Test ( Bi-Directional Control)

4. 51 Reset Service + IMMO Key Programming + ADAS Calibration Free Use

5. Support CAN FD & DOIP Protocol

6. Support FCA (AutoAuth), Access to the security gateway module on 2018 and newer for Fiat/ Chrysler/ Dodge/ Jeep vehicles and etc.

7. Support VAG Guided Functions + For BMW Test Plan + PMI

8. Connect to the car via Bluetooth VCI

9. Support 22 Kinds of Languages & Global Version, NP IP Limit

10. Support 150+ Car Brands Diagnosis

11.Auto VIN Scan + 8-in-1 Live Data Streams + Diagnostic Report+Remote Diagnosis

Note: After receiving the goods, please leave a 5-star positive review with pictures. After the seller passes the review, we will send you a free gift (XTOOL XV200 Endoscope, Value about US$59)

WIFI & Cable Connection Diagnosis

XTOOL InPlus IP919PRO Support WiFi connection, Compared to Bluetooth and Cable connection diagnostics, WIFI connection diagnostics has a faster transmission speed and a longer communication distance, more free and not limited by the length of diagnostic cable, make work is more efficient, convenient and stable.
Multiple connection methods facilitate users to diagnose in or outside the car. Wireless WIFI diagnosis work is more efficient, convenient and stable. (The WIFI connection distance from the vehicle is about 30-100M)

For BMW Plan Test/ VAG Guided Function

XTOOL IP919PRO is the Best Scanner in XTOOL, Specially designed for BMW; for VW for Audi for Skoda for Seat for Bently for Man LD cars etc. Provides Step-by-Step Repair Guidance to Prevent the Car Setting Damaged Caused by the Wrong Operation. Provides diagnostic steps based on vehicle fault dtcs sincluding module testing, functional testing, wiring diagrams, component location maps, etc., facilitating troubleshooting and repair of vehicle faults. For beginners or DIYers, follow up the instructions to get the job done easily and don’t need to reply to a mechanic’s suggestion all the time.

Pre & Post Scan Reporting At a glance

Pre/Post Scan helps mechanics, DIYers get clear comparisons of vehicle conditions before and after repairs. Of course, as a car owner, this will also greatly help you avoid being cheated by the mechanic for expenses, Which is goes a long way to justify the diagnostic charge. With this function help you prevent unnecessary repairs; reduce risk, Which also ensure and prove your car with complete & safe diagnosis.

Highlights of XTOOL InPlus IP919PRO

2026 NEW VERSION OF XTOOL InPlus IP919PRO

You are experiencing 20X faster diagnostics and 150 wider car coverage from 1996-Newer. Function is better than D9S PRO and IP919, the pro-level IP919PRO enjoys powerful 8 GHz, octa-core Processor runs Faster, Smoother and More Stable, improved Android 10, larger 8GB RAM & 128GB, Dual WiFi 2.4/5 GHZ, newly added pre & post scan, and FCA Autoauth for Chrysler for Jeep for Dodge for Fiat etc.

ECU Online Coding & Programming

ECU coding enables multiple car systems to recognize each other and then the actuators can start to work. Online Coding functions directly connect to OEM server, quickly obtain the OEM online data from the server when the code data is lost. ECU Programming for facilitating ECU software/firmware replace and updates, new module programming, finally fix software-controlled driving performance and emission issues

51 Resets & Active Test (Bi-directional Control)

XTOOL IP919PRO is an ideal choice for car repair shop owners and professional mechanics. 51+ hot services including Oil Reset, ADAS Calibration, IMMO Keys (disable lost keys, add new keys), ABS Bleeding, Injector Coding, Write VIN, etc., and still growing. Ranks top in professional automotive tablets. Active test/Bi-directional Control is widely used on car subsystems to help you check if the car actuators are all in good condition. Such as windows, rear mirrors, sunroof, wipers…

Support FCA AutoAuth

For 2018 and later FCA Vehicles with Secure Gateway Module Register with AutoAuth to enable your XTOOL InPlus IP919PRO car diagnostic scanner to communicate with the FCA Authentication System and bypass, so as to perform diagnostics and bi-directionals without using a bypass cable. For Dodge, For Jeep, For Chrysler,etc. Some vehicles may need to unlock the gateway to use other special functions such as reset. To unlock the gateway, you need to purchase a separate FCA account.

OE-LEVEL Full System Diagnostic Lifetime Free Use

The Diagnostics application enables a data link to the electronic control system of the test vehicle for vehicle diagnosis. The application performs functional tests, retrieves vehicle diagnostic information such as trouble and event codes and live data for various vehicle control systems, such as ABS, SRS, Engine,Transmission, Brake , Emission , Fuel , Light , Wiper system and etc.

Topology Map, improving your working efficiency

XTOOL IP919PRO Allows you to easily identify and locate faults in your vehicle’s electrical system. With topology mapping, you can quickly and accurately diagnose issues, saving you time and money on costly repairs. Whether you’re a professional mechanic or a DIY enthusiast, our topology mapping feature is a game-changer that will take your diagnostic capabilities to the next level.

IMMO & Key Programming

Each time you lose the key, key reprogramming tool XTOOL IP919PRO can add the new key and remotely disable the lost one. Support All smart keys lost, Replace smart key ECU, Replace Key, Reset Key, Relearn a key and etc. It has been extended IMMO functionalities For BMW, For BENZ and For Audi For Toyota and etc., work with KC501, KS01, SK1

CAN FD & DOIP protocol

it is compatible with CAN-FD protocol and supports the latest For GM vehicles manufactured after 2020. Experience the future of diagnostics with our latest innovation – the ability to seamlessly connect with CAN FD protocol cars, DOIP Protocol Compatible with for BMW (F&G chassis), for Volvo models (2018 later), for Land Rover & for Jaguar models (2017 later). These groundbreaking protocols revolutionize vehicle communication, achieving up to 20x faster communication between modules.

AUTOVIN & SCAN, 20X FASTER

The XTOOL IP919PRO NO IP Restrictions is designed to improve your work efficiency. With its AutoVIN technology, you can identify your vehicle’s make, model, and year information with just one click. The convenient AutoScan feature automatically scans all of the vehicle’s ECU and detects any fault codes.

22 Kind of Language Support

Support Polish, Portuguese, Arabic, Russian, French, German, Spanish, Dutch, Finnish, Italian, English, Japanese, Korean, Thai, Turkish, Danish, Hungarian, Norwegian, Swedish, Greek, Vietnamese, Traditional Chinese and keep updating…

3 Years Free Updates & 20,000+ models Coverage & Enhanced Hardware

💯Keep this XTOOL IP919PRO automotive scanner diagnostic tool up-to-date with software subscriptions, free for 3 years, with much higher update frequency than similar scanners for cars on the market. The renewal of software will bring you new features, bug corrections, wider vehicle coverage and more. If there are any issues after purchase, feel at ease to send us messages.

💯Global version IP919PRO supports 99% of vehicle diagnosis in the world, 20,000+ models from the US, European, and Asian car markets from 1996-now; still expanding. No IP restrictions

💯10.1 inch capacitive touch screen with 1920*1200 resolution, Upgrade of D9SPRO, 8G+128G Bigger Storage + Android 10.0 OS + WiFi Connection Diagnosis + 6400mAh, 7.2V lithium-polymer battery and Support fast charger

Online ECU Coding

XTOOL new release IP919-PRO Diagnostic Tools Serving as an upper-level function that not only creates the vehicle’s potential but also increases your profits. These automatic functions save us work & time and allow us to concentrate on our driving experi-ence mostly.

1) Flash Hidden Functions: Activate advanced functions or Disable Vehicle Functions: like Deactivating the Start/Stop Function; Beeping When Unlocking and Locking; Seatbelt Warning Sounds; Mirrors Automatically Folding and Unfolding; and more.

2) Component Matching: Match the ECU modules after changing and replacement.

3) Online ECU Coding: Allow you to get more online ECU data from the OEM server, making coding easier and more accurate. Designed for VW, for Audi, for BMW, for Porsche, etc.

4) Designed to enhance vehicle performance and increase business profits, revise the default settings to modify the vehicle’s original behavior, for instance, upgrade halogen fog lamps to xenon fog lamps, replace the battery with a higher capacity one, and install larger tires.x Additionally, incorporate adaptive cruise control, tire pressure monitoring system, and reversing radar through modification.

💥Please Note: ECU Coding changes preprogrammed options which depend on the type and number of electronic features already built in. Thus, ECU coding is not universally compatible and varies for different vehicles.

Online ECU Programming

The diagnostic tool comes with a lifetime free
use ECU programming functions that helps Special for BMW for Mercedes for VW/Audi for Skoda for Ford/Mazda users replace the existing software/firmware in the ECU, program new ECU and fix software-controlled driving performance and emission issues.
For repair shops that tend to expand your businesses to high-end vehicle models, this XTOOL scanner IP919PRO will make your plans come true.

What can this Programming Function do for you?

1) Replace ECU: program blank ECU

2) Write-in Data: refresh used ECU

3) Repair missing ECU information

Bi-Directional/ Active Test

As the 2026 upgraded version of XTOOL IP919PRO, our Newest IP919PRO auto diagnostic scanner for all cars inherits the powerful Bi-directional Control which makes it the most cost-effective XTOOL scanner. Active test is widely used on car subsystems to help you check if the car actuators are all in good condition. Such as windows, rear mirrors, sunroof, wipers…

And also can perform other actuation test functions including Modulate the throttle,Turn Off ACC Lane Keeping Assist System (LKAS) ; Turn ON/OFF Front and Rear side ACM Solenoid, Acceleration Device Test,Brake Vacuum Pump, Open Brakes tests, Parking Brake Motors, Wheel Speed Sensor Supply, etc. Wide Vehicle Voverage With NO IP Limited

– EVAP Vent / Purge Solenoid;
– Cycling ABS Motor Pump;
– Fuel Injector Test;
– Cooling Fan Test;
– Cycling A/C Clutch Relay;

51+ Special Service Functions

Doing regular and routine maintenance on a modern car is impossible without a diagnostic system. Even the simplest procedures require the participation of an auto scanner. That’s why XTOOL engineers have been working on them and making them as user-friendly as possible in the new XTOOL IP919PRO Diagnostic Scanner. Now you can easily do functions like:

💥Coolant refrigerant change: Coolant Bleeding, Activate the electronic water pump.

💥Camshaft learning: The camshaft is a rotating component in the engine, which is usually located in the cylinder block of the engine. Above, it is connected to the crankshaft by a timing belt or chain.After replacing the ckp sensor or ECU, This Reset help you remove the engine or timing belt.

💥TCM oil reset: Allows you to perform reset for a new calculation of transmission Oil Life system once changed the oil.

💥EVAP test: Test of fuel evaporative emission control system. It can store fuel vapor generated by the fuel system, prevent fuel vapor from leaking into the atmosphere, and send the collected fuel vapor into the intake manifold in a timely manner, mix it with normal mixed gas and then enter the engine for combustion, so that the fuel can be fully utilized. To detect the tightness of fuel system valves, mainly used for leakage detection of fuel quick-break valves, oil return valves and oil angle valves.

💥Glow Plug Reset: In a diesel engine, the glow plug needs to be restored to its original state after completing the heating task so that it can be used next time. The function of the glow plug is to provide enough heat for the engine to reach the best working state, especially in cold weather conditions. The glow plug can improve the success rate of engine starting, improve efficiency, save fuel, and reduce exhaust emissions.

💥Fuel Injector Calibration: Adjust the operating parameters of the injector to ensure that the fuel can be injected into the engine cylinder in the predetermined amount and time.

💥DPF/GPF Reset Service: Diesel/Gasoline Particulate Filter Regeneration, Clear PM from the DPF/GPF filter through oxidation or combustion to stabilize the filter performance. Specially designed for Diesel/Gasoline particulate filter systems with DPF/GPF regeneration, DPF/GPF component replacement teach-in and DPF/GPF teach-in after engine control unit replacement. Clear the blockage in the DPF/GPF filter, to meet emission standards.

💥Window/Sunroof Initialization: This feature is designed to perform door window/Sunroof matching to recover ECU initial memory, and recover the automatic ascending and descending function of power window/Sunroof.

Oil Reset: Reset new calculation of Engine Oil Life System for an accurate reading of next oil change.

EPB: Reset the calipers, brake discs or pads after the electronic parking brake system is repaired.

ECU Configuration: Re-flash the hidden function of the car and customize the vehicle as need.

Fuel Trim Reset: Reset the fuel trims provides for a chance that your adaptive fuel map could become stable.

DPF Regeneration: Clear PM from the DPF filter through oxidation or combustion to stabilize the filter performance.

Throttle Relearn: Initialize the throttle actuators to the default state;

TPMS (Tire Pressure Monitor System) Reset: When the tire pressure is insufficient, it is necessary to reset the tire pressure after replacing the tire or sensor, make your car recognize the new TPMS sensor.

ABS Bleeding: Perform to bleed the brake system to restore ABS braking sensitivity and obtain a firm brake pedal

Injector Coding: Code a new injector to better identify injectors to accurately control fuel injection.

IMMO /Key Programming: Remote Key/Key Fob add and programming+ Read Pin Code+ IMMO Reset, etc.

Gearbox Reset: Help complete the gearbox self-learning to improve gear shifting quality

Suspension: Adjust the vehicle height sensor for level calibration when replacing the vehicle height sensor or control module in the air suspension system.

SAS: Adaptation of the sensor to the angular position of the steering wheel

Airbag Repair: After replacing the Airbag, reset the Airbag data and clear the collision data.

Headlight Matching: initialize the adaptive headlamp system.

BMS (Battery Management System) Reset: Re-match the control module and motoring sensor for battery detecting more accurately, clear original low battery information, and prevent the related control module from detecting false information.

A/C Relearn, Write VIN, HV Battery, Window Initialization, Seat Configurations, Power Balance, Electronic Pump Activation, Disable Transportation, Tire Refit, A/F Reset, Start/Stop Reset, Rain/Light Sensor, Brake Reset, instrument cluster, transporte Mode, Gear Learning, EEPROM, ADAS Calibration, speed limit, clutch adaption, Adblue Reset, EGR Relearn, FRM Reset, Nox Reset, VGT Relearn, Control unit Reset, Language Change.

And many more. The new service functions keep rolling out from XTOOL, including expanded coverage for the latest vehicle makes and models.

💥Note: 1) Timely updating will develop more functions; 2) Functions vary by the model.
You can message the VIN code to us to check the compatibility.

Revolutionary Topology Module Mapping

XTOOL InPlus IP919PRO automotive diagnostic tablet is able to support Module Topology Mapping that enable users to know all module status at a glance and root out the problems easily. As the most powerful XTOOL scanner, XTOOL InPlus IP919PRO scanner features the riches fault code analysis function with which you can access the most comprehensive and the latest code-specific data, TSB, DTC analysis, repair assist, repair tips, and relevant repair cases. It has been drawn from real-world shop repair orders and record data that has been thoroughly verified by automotive maintenance professionals.provides a comprehensive view of a vehicle’s data bus configurations,

💥Please be noted that Topology is not universal to all the above vehicle brand models, please send your VIN to us before you place order.

All-system Diagnostic

The XTOOL IP919PRO automotive diagnostic tools Full Systems Diagnoses In All Vehicle Systems on the ECU : Read/erase codes, view live data, retrieve ECU version information. It performs active testing and service functions on all systems including E~CM, TCM, ABS, SRS, BCM, IMMO, BMS, TPMS, SAS, f uel system, lighting system and A/C system. The functions cover up to 200,000 models worldwide.

Key Fob Coding & Programming

IMMO KEYS & MORE FUNCTIONS The IP919PRO wireless car diagnostic tool is cost-effective to offer IMMO feature, allowing key reprogramming and remote disabling of lost keys. Note: Only available for some vehicles

8 IN 1 Live Data Graphing

XTOOL Newest IP919PRO automotive scanner Export Live Data as CSV: Exporting live data as CSV file to track vehicle performance over time.Up to 8 PIDS Graphing in One: Allow you to customize specific PID, and merge graphs for up to 8 data PIDs combined at one time in one view. Graph up to 8 sensors individually on the same screen.A line graph will allows you to see what happened at what time and in relation to what else you’re interested in

Auto VIN/SCAN

XTOOL IP919 Pro supports Auto VIN Scan, Manual VIN Input, Scan VIN, Manual Vehicle Selection, etc. for vehicle identification

Auto VIN Scan: fast identify vehicles by auto-detect and scan all available systems for fault codes;

Multiple languages for global technicians

XTOOL INPLUS IP919PRO Automotive diagnostic tool covers 22+ languages for better term understanding: Polish, Portuguese, Arabic, Russian, French, German, Spanish, Dutch, Finnish, Italian, English, Japanese, Korean, Thai, Turkish, Danish, Hungarian, Norwegian, Swedish, Greek, Vietnamese, Traditional Chinese and keep updating…

Warm TIP: The factory presets the language and the model software in English or other. However, this will not prevent you from switching to other languages, After switching the language, customer needs to re-download the model software in the corresponding language.

Please update your tablet app version to V5.7.58 or higher in the settings. Language authorization is no longer required, and buyers can freely change it! If you find that you cannot update automatically, please contact our technical staff to push the update to you

200+ Brands, NO IP Restrictions

XTOOL Automotive Scanner IP919PRO Unlike factory and dealer tools that can work only for certain vehicles with limited functionalities, XTOOL scanner IP919PRO for all cars has complete database covering 99% of vehicles from 200+ diverse brands / 20,000 models

Supports 2018+ FCA, and “NO IP restriction” (can be used worldwide w/o losing any features).

IP919PRO ranks top in professional automotive tablets and keeps updating to support more newer modes from 2025 to 2026.

IP919PRO Specification

● Operating System: Android 10.0

● Processor: 8 GHz, octa-core Processor

● Memory: 8GB RAM & 128GB On-board Memory

● Display: 10.1 inch TFT-LCD with 1920 x 1200 resolution & capacitive touch screen

● Battery: 6400mAh, 7.2V lithium-polymer battery, fast charging

● Working Voltage: 9V-32V

● Power Voltage: DC 12V

● Humidity：<90%

● Dimension (L×W×H): 313X218X30 mm

● Protocol compatibility: CANFD, DoIP

● Storage Temperature: -40 to 60℃

● Operating Temperature: -10 to 40℃

● Auto Input/Output: Microphone/ Speaker

● Sensors: Gravity Accelerometer, Ambient Light Sensor

● Camera: Rear camera, 8.0 Megapixel, AF with Flashlight.

● Connectivity: WIFI 2.4/5 GHZ, Type-C

IP919PRO Package Includes

1 * IP919PRO Android Tablet

1 * VCI WiFi connector

­1 * For KIA-20

1 * For Mazda-17R

1 * For Nissan-14

1 * For GM/Daewoo-12

1 * For Suzuki-3

1 * For Fiat-3

1 * OBD II-16

1 * DB15 Main Cable

1 * For Toyota-17

1 * For Audi-4

1 * For Mitsubishi-12+16

1 * Universal-3

1 * Citroen-2

1 * For BENZ-38

1 * For BENZ–14

1 * For HONDA-3

1 * For BMW-20

1 * For HYUNDAI/Kia-10

1 * Quick Start Guide & Packing List

1 * Type C to A

1 * Type C to B

1 * Type C to C

1 * Charge Adapter US

1 * Charge Adapter UK

1 * Charge Adapter EU