€450 for repair 2cm dents? 😱 Unbelievable!”
Save BIG with €75 to remove ALL dents—big and small—while enjoying a simple DIY fix!
✅ Repair motorcycles, fridges, washers – no disassembly!
✅ Easy to Repair – Includes all professional accessories! Whether you’re a pro or new to dent repair, our ergonomic kit + step-by-step guide make repairs effortless!
✅ No repainting– keep your original finish intact.
✅ Global fast shipping – We have warehouses in Germany, France, UK, USA, and Australia. Your kit ships from the nearest location, arriving in 2-3 days! 🚚
See dents vanish instantly—no magic, just PDR paintless dent removal repair! ✨
Stop overpaying. Fix it yourself!
How to use:
1.Clean the dent with a clean wet cloth;
2.Mount the glue stick into the glue gun,pull the trigger to let the glue stick enter into the glue gun, connect the power source and preheat for 5 minutes;
3.Use a proper drawing gasket. Large dent requires a large drawing gasket.(Note: The larger the drawing gasket is, the larger the drawing force is);
4. Pull the trigger and apply the drawing gasket with extruded glue (The 4 holes of gasket should be applied with hot melt glue);
5. Fast place the drawing gasket with hot melt glue at the center of dent,press lightly until the glue cures and adheres (Let the glue cool for about 8 minutes. The cooling time should be less than 10 minutes and should be shorter slightly in winter);
6. Align the T-shaped repairer and press the drawing gasket with hot melt glue,pull the sliding rod backwards to pull up the dent;
7. Check with a Line board. If dent still exists, knock it slightly with a flattening hammer or pen;
8. Clean the repaired place with a clean wet cloth.
Pro Set
Deluxe Set
Dent Lifter Tool
Reflector Lamp Board
100W Glue gun with High viscosity glue stick(yellow）
Before and after restoration
